How to Replace Grease Gun Bearing

There are many types of grease gun available on the market today. Many people choose to have them as a tool in their garage or shed. If you use your gun frequently then it is important that you know how to load it so that it can work when you need it to. The grease gun works with compressed air that is stored in a tank. Here is how to load a grease gun so that you can get the most out of your tool.

Before you get started, make sure all the needed fittings are in place and that they are not damaged or broken. Grease fitting screens are used to help keep grease coming out of the fittings while you are working with it. Fitting screens also prevent other materials from coming off the fitting such as oil or paint. Check the following components before you continue.

The first thing you will want to check is the barrel of the grease gun. The barrel is used to guide the compressed air through the gun and create the heat needed to bond the two pieces of metal together. If the barrel is damaged, the flow of air will be restricted and may prevent the seal around the metal from being maintained. This will prevent the gun from working.

If you have a damaged barrel, you will need to remove it before you can begin. First, take off the handle and the entire magazine. If possible, remove both the pump and the handle from the original package so that the damaged part is not mixed with the rest of the parts. In some cases, this piece can be found on the bottom of the magazine already. Once the entire piece has been removed, you will have an idea as to how much of the part needs replacing.

Next, you should remove all of the old air locks. This is very important for how to load a grease gun correctly. Air locks are placed on the handle to help the gun prevent contamination when it is in use. If the air lock was removed, you should place the magazine upside down and load the gun. Use the screwdriver to pry the retaining clip from the magazine.

After this process is complete, you should look at the remaining parts to see what kind of configuration needs to be altered. Some people like to change only the screw design, while others want to replace the entire handle. You will find that there are many different handles to choose from including classic pistol, modern and antique. The type of modification you choose will depend on personal preference. For instance, if you want to change the grip you will be able to find all kinds of different configurations including double and tri-fold.

Some people prefer to remove the bolt from the old grease gun, but others might not want to. If you are not sure as to whether or not you should remove the bolt, you can check with your local authorities to see if changing the oil has caused the current condition of the bearing. In most cases, a bearing must be replaced if it no longer slides easily in and out of the cylinder. This process can be done in one of two ways, you can either remove the spindle bolts and separate the bearing from the cam or rollers, or you can install new bearings.

Once you have the new bearing installed and the old grease gun has been discarded, you can start on the new task of replacing the air locks. These can be tricky to remove, so make sure you have a good pair of gloves handy. The old seals can often become damaged in the process, so it is important to have a specific cleaner designed to keep these greases away. Use the same detergent that you used for the greasing handle, and spray each piece down. Make sure that each piece of plastic that you have removed goes back on correctly before continuing and that you work in small circles.

Leave a Reply

Your email address will not be published. Required fields are marked *