A vital accessory for any table saw, a featherboard will help to keep the workpiece and saw in place securely. Typically, when the saw blade moves, you may not get your preferred cut, but, when you use a featherboard, you will find that the workpiece becomes pressed firmly against the worktable that allows for better saw movement.

Unlike a traditional featherboard design that uses scrap lumber, a modern featherboard is manufactured and secured for better operation as well as fewer kickbacks thanks to the firm pressure placed against the workpiece that ensures safety. Here are a few tips and reviews to help you find the best featherboard for table saws.


Comparison Table

1
Kreg
Weight: ‎1.28 pounds

Dimensions: ‎9 x 3 x 7.5 inches

Material: Plastic

2
Hedgehog
Weight: ‎9.6 ounces

Dimensions: 9.5 x 6.5 x 1.75 inches

Material: Nylon

Milescraft
Weight: 1.6 pounds

Dimensions: ‎9.6 x 8.3 x 2.3 inches

Material: Plastic

4
Magswitch
Weight: ‎1.15 pounds

Dimensions: ‎6.9 x 3.9 x 2.1 inches

Material: ‎Plastic/Metal

5
BI-DTOOL
Weight: ‎1.55 pounds

Dimensions: ‎10.47 x 8.5 x 2.52 inches

Material: High-tech polymer

6
DRILLPRO
Weight: 1.6 ounces

Dimensions: N/A

Material: ‎High-tech polymer

7
Fulton
Weight: ‎2.61 pounds

Dimensions: ‎8.03 x 7.44 x 3.23 inches

Material: Polymer

8
Bench Dog
Weight: ‎1.17 pounds

Dimensions: 13.9 x 9.2 x 1.5 inches

Material: High-tech Polymer

9
Bow
Weight: 14.4 ounces

Dimensions: 11.8 x 9.6 x 2.35 inches

Material: High-density Foam

10
SWMIUSK
Weight: 1.5 pounds

Dimensions: ‎10.5 x 8.4 x 2.5inches

Material: Plastic

 

Top 10 Featherboards for Table Saw

 

Kreg PRS3020 True-FLEX Featherboard – Best Overall Featherboard

Kreg PRS3020 True-FLEX Featherboard – Best Overall Featherboard

Easy and quick to connect, the Kreg PRS3020 True-FLEX Featherboard doesn’t require additional hardware when joined with a T-Slot or Miter Slot. Made out of a durable plastic composite, this body will ensure optimal flexibility and workpiece pressure. Carefully engineered, this featherboard offers consistent pressure that will last you a long time.

Versatility

Featuring an exclusive wedge-lock system, the Kreg PRS3020 True-FLEX Featherboard allows you to adjust the system accordingly, so you can work confidently. This featherboard works in Miter Slot or T-Slots on band saws, router tables, and table saws.

Check Price

Pros
  • The materials hold up well
  • You can make adjustments easily
  • This is a durable product that gives you a lot of flexibility
Cons
  • It should really be offset
  • The fastening system doesn’t work well

Premium Hedgehog Spiral Featherboard – Most Productive Featherboard

Premium Hedgehog Spiral Featherboard – Most Productive Featherboard

Creating a safer, faster, and easier workflow, the Premium Hedgehog Spiral Featherboard works with band saws, table saws, and router tables. Offering fast production, this featherboard is a professional-level unit that uses just one pivot point instead of magnet systems or two-knob adjustments making it a great choice for beginners as well.

Improved Productivity

Providing increased productivity, the Premium Hedgehog Spiral Featherboard can be used with just one hand while also using a shorter cutting time, so you can focus on other parts of the project. It also includes a patent-protected design while allows you to work safely. With one knob adjustments, you only need to use one knob for seamless, quick, and easy adjustments. you can focus on other elements of your project.

Great for Beginners

A great choice for beginners, this featherboard allows for accurate woodcuts providing you tons of control with just one hand. The precision of the Hedgehog Spiral Featherboard ensures that the wood will be held tightly against the fence resulting in smoother and cleaner cuts, which will drastically improve the production and quality of your woodworking projects. It also reduces kickback and gives you a higher-quality output.

Check Price

Pros
  • This is an incredibly solid piece
  • It’s very accurate and has no play when it operates
  • This featherboard is a great choice for any skill level
Cons
  • There is almost no range with when the screw is tightened into the miter slot
  • You need to add padding when you insert the adjustment screw into the slot

Milescraft 1407 D/T FeatherBoard – Best Tandem FeatherBoards

Milescraft 1407 D/T FeatherBoard – Best Tandem FeatherBoards

Featuring dual slide motion, the Milescraft 1407 D/TFeatherBoard is equipped with a special pre-load tension design that includes the featherboard and a strong spacer intended for tall stock cutting projects. It also comes with two 5/8-inch and ¾-inch miter bars along with four T-Slot bolts that let you use either tandem or dual featherbaord for pretty much any project on a band or table saw and router tables.

Innovative Design

With an innovative design, the Milescraft 1407 D/T Featherboards give you the most holding pressure and consistent tension that is created by a special split rail construction. It comes with mounting hardware for pretty much any tandem or dual application. The dual slide motion offers forward and side to side action for easy and fast setup while the special pre-load tension design that allows you to quickly set up the tension for a consistent cut that also reduces the chance of kick-back.

Check Price

Pros
  • This set is worth the investment
  • It has a great design that provides consistent tension
  • This is an easy to setup featherboard
Cons
  • The bolts need to be tightened before they work well or they just spin
  • The design makes it difficult to move around

Magswitch Universal Featherboard – Best Universal Design

Magswitch Universal Featherboard – Best Universal Design

Capable of working on either side of the blade, the Magwitch Universal Featherboard has a low profile and is double-sided. It improves your cutting results on each side of the blade and is also designed to work on any kind of cast-iron fence in order to hold down your work. Perfect for a small table, this featherboard is versatile with no miter slot limitation.

Universal Design

This universal featherboard comes with two on and off Magswitches that each has 95 pounds of hold force. The Magswitch Universal Featherboard has very fast setups along with precise tensioning and positioning and is constructed from durable and strong ABS UL94VO material that will give you years of use. It also features both right and left feed or out and in feed on a fence or table.

Check Price

Pros
  • The magnets are very strong
  • This is featherboard has a fast setup
  • It’s a long-lasting and durable product
Cons
  • You are limited by the miter slot
  • It can be hard to use on a long board

BI-DTOOL Double Featherboards – Most Adjustable Featherboard

BI-DTOOL Double Featherboards – Most Adjustable Featherboard

With a widely applicable size, the BI-DTOOL Double Featherboards are adjustable and comes with two miter bars and T-Slot bolts that can be used for most of the standard miter slots. The split rail miter bar construction and wedge-lock hardware will give you the best hold for a router fence or bandsaw table. Using reliable materials, this featherboard is made from a high-tech polymer as well as specially angled fingers to provide consistent pressure to produce a clean cut and less kickback, lifting, or chattering.

Easy to Install

This easy to install featherboard has a special miter gauge slot that includes ergonomic knobs that let you set up the board to a T-Slot or a miter slot. The Bi-DTOOL Double Featherboards hold the piece against the fence securely to keep your hands protected and stop bent blades, kickback, and blinding. Plus, each cut is accurate thanks to the board’s most holding pressure and consistent tension.

Check Price

Pros
  • This is a solid and heavy-duty featherboard
  • It comes with spacers and hardware to make it more versatile
  • It comes with two types of miter slot runners
Cons
  • The miter slot inserts are not made well and are pretty loose
  • It doesn’t work well with small pieces

DRILLPRO Double Featherboards – Most Versatile Featherboard

DRILLPRO Double Featherboards – Most Versatile Featherboard

Essential when holding stock securely against a tabletop and guide fence, the DRILLPRO Double Featherbaords can be easily and quickly connected to a T-Slot or Miter Slot. Providing a large increase in the safety, accuracy, and quality of the cuts, this featherboard is constructed out of a high-tech polymer and comes with 13 angled fingers, which apply consistent pressure.

Versatility

Equipped with a slide, this featherboard slips into the router table’s miter-gauge slots, which are then locked into place with a pair of tightening knobs. You can also use it on a band saw, shaper, and table saw. It also includes angled fingers that give you consistent pressure that will produce a clean cut will less lifting, kickback, or chattering.

Unique Design

The DRILLPRO Double Featherboards include four miter bars that fit most of the standard miter slots as well as wedge-lock hardware that works in either Miter Slots or T-Slots on a band saw, a table saw, and router tables. The unique design of the featherboard can quickly be connected, easy to install, easy to use, and very durable.

Check Price

Pros
  • This is an easy to set up featherboard
  • It’s a great value for the price
  • This is a versatile product that gives you clean cuts
Cons
  • It does not have captive screws, so it won’t tighten into place
  • It’s not as fast as the magnetic version

Fulton Dual Deluxe Stackable Featherboards – Easiest to Use Featherboard

Fulton Dual Deluxe Stackable Featherboards – Easiest to Use Featherboard

You can use the Fulton Dual Deluxe Stackable Featherboards as a single unit or it can be separated so it can be used for horizontal and vertical projects. When you stack the featherboards with the two-inch spacers, you can achieve 3 7/8-inches of holding pressure height, which means that you can hold bigger stock for a resawing project on a band or table saw. When you use these featherboards separately, you can install one into a miter slot, and you can install the other one into a fence track.

Easy to Use

The Fulton Dual Deluxe Stackable Featherboards come with a redesigned miter bar that makes it easier to lock and a lot secure. Made out of aluminum, this bar is longer than and narrower than the previous design, which means that when the bolt is seated and the knob is securely in place, the bar will spread out better than it did previously to create a tight fit into the miter track. You also have the option to mount these featherboards into a small t-track slot, which are commonly used on router table fences and router tabletops.

Versatility

These featherboards can also be used horizontally when it is laying flat on a table saw or router table surface or vertically on a router table fence. It also includes the hardware needed to start using it right out of the box. Measuring approximately 7 ¾ by 7 1/8-inches, which is perfect for most table saw tops and workshop fences.

Check Price

Pros
  • You get everything you need to hold a board onto your fence
  • You get edge dado options thanks to the shims stacking
  • It’s a great value for all that you get
Cons
  • It’s hard to get the board securely attached to the track on your saw table
  • It’s too big for some tables

Bench Dog Feather-Loc Double Featherboard – Safest to Use Featherboard

Bench Dog Feather-Loc Double Featherboard – Safest to Use Featherboard

Ideal for router tables and table saws, the Bench Dog Feather-Loc Double Featherboard is made of two industrial-quality featherboards that are constructed from a high-tech polymer. Each of the featherboards includes 13 angled fingers, each of which applies consistent pressure to produce clean cuts with reduced lifting, kickback, and chattering. These featherboards slide into a miter-gauge slot in the router fence or table, and they are locked into place when you tighten a set of knobs.

Safe Cuts

Important for holding stock securely against the guide fence, the Feather-Loc feature gives you safe cuts every time. When you attach Feather-Locs to both of the fences and the tabletop, you can rout thin and long stock on the table. It will also help to protect your hands and stop bent blades, kickback, and binding.

Easy to Set Up

The Bench Dog Feather-Loc Double Featherboard is easy to set up, retains its original shape, and will not mar your workpiece. This featherboard is designed for a 1/4 -inch T-track and requires the Benchdog 10-012 miter slot adapter when it’s used on miter slots for table saws, band saws, shapers, and router.

Check Price

Pros
  • This is an easy to use featherboard that gives you safe cuts
  • It keeps your hands safe and prevents kickback
  • This featherboard won’t mar your workpiece
Cons
  • You have to buy a nylon spacer to use a T-fence track
  • The screws need to be longer

Bow Featherpro Feather Board – Quietest Featherboard

Bow Featherpro Feather Board – Quietest Featherboard

Made out of durable plastic, the Bow Featherpro Feather board is made out of high-density foam that helps with kickback resistance, feed control, and non-marring. This featherboard is ideal for either hobbyists or professionals. The feather is constructed of durable and strong and non-marring high-density foam, which was designed with hinges on each of the feathers in order to absorb the kickback energy as well as the pinch of the wood when it is against the fence.

Absorbs Vibration

Absorbing vibration to reduce chatter, the Bow Featherpro Feather Board feather has a larger surface area and is thicker, but they also disperse the tension over a wide area while the living hinge and high-density foam material combination will result in greater control and a smooth glide on the infeed. Featuring reversible feathers, the patented hinge feather design will absorb the kickback and is about five times safer than wood or plastic featherboards.

Increased Surface Area

With thicker feathers, the Bow Featherpro Feather Board will increase the surface area contact on the workpiece and ensure that you have a superior infeed and a smoother glide. It also dampens vibrations and reduces chatter to make a clean cut. This versatile featherboard has better sensitivity feedback and features non-marring feathers that won’t harm router bits or carbide blades.

Check Price

Pros
  • It absorbs vibrations to keep it quieter as your work
  • You get an increased surface area to work on
  • It won’t mar your workpiece as it operates
Cons
  • It won’t fit if you have a table with 5/8-inch miter gauge slots
  • The foam won’t last long

SWMIUSK True-Flex Featherboard – Most Durable Featherboard

SWMIUSK True-Flex Featherboard – Most Durable Featherboard

Made out of durable plastic, the SWMIUSK True-Flex Featherboard comes with a T-bolts system and a wedge-lock system that provides strong fastening. Capable of fitting most of the common tracks, this is a safe and professional level featherboard that is easy to use and connects to a T-Slot or Miter Slot without needing more hardware. and T-bolts system that all of them will provide strong fastening.

Durable and Efficient

This durable featherboard is made of very durable plastic parts that will last you many years. The SWMIUSK True-Flex Featherboard is efficient and safe when the workpiece is pressed up against a fence the entire time as you cut. It gives you a nice clean cut and a professional level experience. You also get two miter bars along with two T-Slot bolts that fit most of the standard miter slots.

Check Price

Pros
  • This is an efficient featherboard that gives you nice clean cuts
  • It is safe and easy to use
  • This is a professional level tool
Cons
  • It could use some spacers to life up thicker material

Buyer’s Guide – Considerations When Choosing a Featherboard for a Table Saw

Materials

One of the most important considerations when purchasing a featherboard for a table saw is the material it is made out of. It’s important not to just go for the cheapest featherboard you can find, which can ruin or mar your workpiece. Instead. Look for a sturdy tool that will last you a long time. Look at the quality of the plastic and foam material before you buy it and remember that not every featherboard will have the same quality, so it’s important to do your research and see what others thought of the product as well.

Weight

The weight of a featherboard can vary depending on the material that was used to construct it. Typically, the weight will fall somewhere between a pound or two. Depending on it’s weight, there can be the difference in the machine’s usability.

Durability

No one wants to waste money replacing tools, so it can be a smart investment to pay a little more to get something nice and durable. The featherboard’s durability will depend on the materials that are used to construct the product. Look for premium quality plastic and ABS to ensure that you have a durable product that will last a long time and pay off on your investment in the long run.

Maintenance

When you purchase a nicer quality product, you also need to invest in the product’s maintenance. Typically, a featherboard needs little to no maintenance. Make sure you do your research and find a good quality product that will allow you to make the right cuts on different workpieces.


Features to Look for in a Featherboard

Adjuster knob and Wing Nut Features

Typically, you will find three main features that you need to look for in the wing nut of a featherboard:

Shape

The wing nut’s shape may vary from rectangular, hexagonal, pentagonal, to trigonal. Just remember that the execution of the wing nut is more important than its shape, but you want to make sure that the shape is ergonomic enough that it provides precise control, great aerodynamics, and a natural user experience.

Magnetic versus Manual

When considering using manual versus magnetic is really just user preference. A manual knob will last longer give you precise control and allows you to use a table saw base made out of any type of material. Plus, most professionals feel more comfortable when they use them.

In comparison, a magnetic knob can be detached and attached quickly to offer more natural use, is not restricted by placement, so you can set it anywhere on the board, is easy to replace, and will perform better on a steel or iron base table saw. Again, it’s all up to your preferences.

Bolts

When talking about the bolts, we mean the screws or bolts that are used to install the manual wing nuts into the featherboard. This is a consideration many users, even professionals, forget to think about. This consideration is important when thinking about the featherboard’s durability, as it can play a huge role in maintaining its structural integrity. You want to look for a stainless-steel screw that won’t rust, which is recessed inside the wing nut. Also, look for a featherboard that features extra T-bolts and extension bolts since they can be handy for future projects.

Reversible Featherboard

To get the most out of your investment, choose featherboard that is reversible. This will allow you to easily rearrange the featherboard to achieve both left and right-handed infeed control allowing you better precision as well as safety.

Detachable Assembly

An assembly that is detachable is also recommended to allow for dynamic use of the board to increase your spontaneity and production speed. Look for a feather board that has a structure that isn’t fixed and can be attached and detached quickly and easily.

Feather Construction

When choosing the best feather for your featherboard, here are a few things to remember:

Aerodynamics – Look for a set of feathers that were engineered with both ergonomics and aerodynamics in mind. This can be achieved by finding feathers that have detailed construction, correct spacing, and looking at the feather’s direction. Providing a nice strong grip on your workpieces, this feature will also prevent the surface of the piece from becoming burned and reduce kickback.

Rounded edges also help to prevent marring on your workpieces and having a small triangle on the last feather will make it more efficient. It can also help if your table saw has a tilt that is misaligned and still allows you to get a perfect cut. As far as how many feathers you need, remember that the medium number of feather that is recommended is 13, and, in this case, more is not necessarily better.


Summary/Conclusion

With a little research, you can easily find the best featherboard for a table saw. You want to make sure you find a durable, long-lasting, and efficient featherboard for your table saw to help improve your productivity and the quality of your projects.


John Billiou

John Billiou

LOCATION: Visalia, California

OCCUPATION: President

John Billiou assumed operations of the family business in 1989 with a “big appetite” for success.

Based in Central California, Billiou's Has been serving the Parts Needs of Lawn & Garden Dealers Across the Western United States for 70 Years.

Today, the company distributes new equipment and parts in 13 Western states and John said their No. 1 customers are cities and counties.

Billiou’s provides field support through their call center, field sales force, and an extensive website.

Billiou’s team strives to longstanding value to the customer and readers by making reliable and solid buying recommendations.

Leave a Reply

Your email address will not be published. Required fields are marked *